NSN 5305-01-600-0708
High Torque Screw
3.875 inches fastener length, flat countersunk head style, 0.506 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number LD111-0044-0462 for national stock number 5305016000708.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-600-0708.
-
MPN or Model
LD111-0044-0462
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.397 inches -
Fastener Length
3.875 inches -
Head Style
Flat countersunk -
Head Diameter
0.506 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
2.875 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629, ph13-8mo assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-971-7539 MPN AIC82-5-13Machine Screw
- 5305-01-004-9520 MPN 965817-107CSocket Head Cap Screw
- 5305-01-015-9679 MPN AIC209-1Socket Head Cap Screw
- 5305-01-025-6412 MPN AIC812-08-4Machine Screw
- 5305-01-303-6352 MPN AIC939-3-6PClose Tolerance Screw
- 5305-01-310-9249 MPN AIC986-6-10Close Tolerance Screw
- 5305-01-329-9954 MPN AIC4414-3-20Machine Screw
- 5305-01-336-4390 MPN AIC984-4-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-600-0708 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Boeing Company, The |
LD111-0044-0462 | Huck International, Inc. |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Sonic Industries Inc. |
LD111-0044-0462 | Hi-shear Corporation |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Boeing Company, The |
LD111-0044-0462 | Huck International, Inc. |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Sonic Industries Inc. |
LD111-0044-0462 | Hi-shear Corporation |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Boeing Company, The |
LD111-0044-0462 | Huck International, Inc. |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Sonic Industries Inc. |
LD111-0044-0462 | Hi-shear Corporation |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Boeing Company, The |
LD111-0044-0462 | Huck International, Inc. |
LD111-0044-0462 | Sps Technologies, Llc |
LD111-0044-0462 | Sonic Industries Inc. |
LD111-0044-0462 | Hi-shear Corporation |
LD111-0044-0462 | Sps Technologies, Llc |