NSN 5305-01-601-7772
High Torque Screw
0.715 inches fastener length, oval countersunk head style, 0.362 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number HT4032V4-5 for national stock number 5305016017772.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-601-7772.
-
MPN or Model
HT4032V4-5
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
0.715 inches -
Head Style
Oval countersunk -
Head Diameter
0.362 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
High-torque -
End Application
B1-b aircraft -
Thread Diameter
0.250 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 degrees reduced head, domed close tolerance -
Material
Titanium alloy -
Material Specification
Nas 621 national specification single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-535-6804 MPN CA17248-6-8-2Turnlock Receptacle
- 5305-00-151-8690 MPN CA2630-0413Close Tolerance Screw
- 5305-01-172-7099 MPN CA2194-4-07Close Tolerance Screw
- 5306-01-215-2499 MPN 9505M46P02Internal Wrenching Bolt
- 5305-00-069-5200 MPN HT4A-14Machine Screw
- 5305-00-080-9247 MPN HT4064-3-14Machine Screw
- 5305-00-519-7208 MPN HT4024L6-13Close Tolerance Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-601-7772 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4032V4-5 | Arconic Global Fasteners & Rings, |
HT4032V4-5 | Hi-shear Corporation |
HT4032V4-5 | Sps Technologies, Llc |
HT4032V4-5 | Alcoa Global Fasteners, Inc. |