NSN 5305-01-602-4172
High Torque Screw
0.682 inches fastener length, flat countersunk head style, 0.383 inches head diameter, grip diameter: 0.1885 inches .
Manufacturer part number BACB30LH3-11 for national stock number 5305016024172.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-602-4172.
-
MPN or Model
BACB30LH3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
0.682 inches -
Head Style
Flat countersunk -
Head Diameter
0.383 inches -
Grip Diameter
0.1885 inches -
Point Diameter
Between 0.181 inches and 0.184 inches -
Point Style
Flat -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
0.337 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Aams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-018-5864 MPN 69-26769-1Slipway Door Fitting
- 1560-00-020-7486 MPN 69-11905Air Intake Door Hinge Assembly
- 1560-00-073-2542 MPN 107S3304-2Aircraft Access Door
- 1560-00-213-4017 MPN 9-21002-3Nacelle Cowling Latch Assembly
- 5935-00-224-3745 MPN 25-30105-70Electrical Receptacle Connector
- 4920-00-253-3807 MPN 3TE65B92203Wing Plug Assembly
- 1560-00-302-2513 MPN 3-61392Nozzle Valve Guide
- 1560-00-306-9827 MPN 6-38343-2Camera Door Cable Drum
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-602-4172 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3-11 | The Boeing Company |