NSN 5305-01-603-6145
Bolt Stove
2.812 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1801-4-45 for national stock number 5305016036145.
Datasheet
-
Product description
Machine Screw NSN 5305-01-603-6145.
-
MPN or Model
NAS1801-4-45
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
2.812 inches -
Fastener Length
2.812 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Screw Material
Steel comp 4340 or steel comp 8740 -
Screw Material Specification
Mils-s-5000 military specification single material response or mil-s-6049 military specification single material response or ams 6322 assn standard single material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-153-4395 MPN NAS1642R16-24SNElectrical Receptacle Connector
- 5940-01-439-4144 MPN NAS1063A14-1JTerminal Board Marker Strip
- 5305-00-004-2155 MPN NAS1351C5-16Socket Head Cap Screw
- 5305-00-007-1589 MPN NAS1102C02-7PMachine Screw
- 5305-00-007-3020 MPN NAS1102C02-4PMachine Screw
- 5305-00-050-4212 MPN MS90725-186Hexagon Head Cap Screw
- 5305-00-053-9355 MPN MS35191-259Machine Screw
- 5305-00-165-1874 MPN NAS1101-06H4Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-603-6145 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1801-4-45 | National Aerospace Standards |