NSN 5305-01-604-4653
High Torque Screw
1.278 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number BACS12HU4A14 for national stock number 5305016044653.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-604-4653.
-
MPN or Model
BACS12HU4A14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
1.278 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Spline Minor Diameter
0.221 inches -
Spline Major Diameter
0.221 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Torx -
Thread Diameter
0.2500 inches -
Grip Length
0.875 inches -
Thready Qty Per Inch (tpi)
28 -
Part Name Assigned By Controlling Agency
Screw, flat pan head -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-6865 MPN AIC822-04-3Socket Head Cap Screw
- 5305-00-951-5442 MPN NAS1101C04-10Machine Screw
- 5305-01-056-2158 MPN BACB30LU2-10Close Tolerance Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-201-9380 MPN AIC813-3-R11Machine Screw
- 5305-01-290-4868 MPN AIC985-5-5Close Tolerance Screw
- 5305-01-356-9538 MPN 03A292-3-47Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-604-4653 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACS12HU4A14 | The Boeing Company |
BACS12HU4A14 | Sps Technologies, Llc |
BACS12HU4A14 | Heartland Precision Fasteners, Inc. |
BACS12HU4A14 | Pilgrim Screw Corporation |
BACS12HU4A14 | The Boeing Company |