NSN 5305-01-607-2093
High Torque Screw
Between 1.079 inches and 1.109 inches fastener length, flat countersunk head style, between 0.7170 inches and 0.7604 inches head diameter, head height: 0.167 inches .
Manufacturer part number NAS1580C6T8 for national stock number 5305016072093.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-607-2093.
-
MPN or Model
NAS1580C6T8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.079 inches and 1.109 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.7170 inches and 0.7604 inches -
Head Height
0.167 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.49 inches and 0.51 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
14000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 degrees flush head -
Material
Stainless steel -
Material Specification
A-286 cres per ams5731, ams7532 or ams5737 national std/spec single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-00-478-1021 MPN NAS1650R12B10SElectrical Receptacle Connector
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-005-8113 MPN MS18064-46Setscrew
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-119-4634 MPN NAS1156V19Close Tolerance Screw
- 5305-00-129-9431 MPN NAS623-2-11Machine Screw
- 5305-00-138-0067 MPN NAS1351C08-4Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-607-2093 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C6T8 | National Aerospace Standards |
Stock Check
- NE: 427
- NS: 38