NSN 5305-01-607-7491
High Torque Screw
Between 2.929 inches and 2.959 inches fastener length, flat countersunk head style, between 0.810 inches and 0.889 inches head diameter, grip diameter: between 0.467 inches and 0.468 inches .
Manufacturer part number NAS7307A36Y for national stock number 5305016077491.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-607-7491.
-
MPN or Model
NAS7307A36Y
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.694 inches -
Fastener Length
Between 2.929 inches and 2.959 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.810 inches and 0.889 inches -
Grip Diameter
Between 0.467 inches and 0.468 inches -
Internal Drive Style
Cross recess type 1 -
End Application
Kc-135 aircraft -
Thread Diameter
0.4375 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Surface Treatment
Aluminum -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6517 MPN NAS1063A15-329Terminal Board Marker Strip
- 1680-01-524-1349 MPN NAS520-12-9Aircr Air Duct Hose
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-008-5813 MPN NAS1742C06R10Socket Head Cap Screw
- 5305-00-055-2567 MPN NAS1219-08-8TMachine Screw
- 5305-00-057-0480 MPN MS24694C115Machine Screw
- 5305-00-108-9712 MPN NAS1218-6-4Machine Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-607-7491 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7307A36Y | The Boeing Company |
NAS7307A36Y | National Aerospace Standards |
NAS7307A36Y | The Boeing Company |
NAS7307A36Y | National Aerospace Standards |