NSN 5305-01-609-7042
High Torque Screw
Pan head style, between 0.594 inches and 0.615 inches head diameter, between 0.203 inches and 0.218 inches head height, grip diameter: 0.310 inches .
Manufacturer part number NAS1135E3DP for national stock number 5305016097042.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-609-7042.
-
MPN or Model
NAS1135E3DP
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Head Style
Pan -
Head Diameter
Between 0.594 inches and 0.615 inches -
Head Height
Between 0.203 inches and 0.218 inches -
Grip Diameter
0.310 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
0.188 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740
More from these suppliers
- 5975-00-709-9429 MPN NAS622CT3Electrical Clamp Hook
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-003-6823 MPN NAS6002U24Machine Screw
- 5305-00-003-9327 MPN NAS6003U18Machine Screw
- 5305-00-008-9118 MPN NAS1190E04T8LSocket Head Cap Screw
- 5305-00-054-9255 MPN MS51047-34Setscrew
- 5305-00-082-8440 MPN MS3212-13Machine Screw
- 5305-00-113-3733 MPN NAS560CK3-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-609-7042 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1135E3DP | National Aerospace Standards |