NSN 5305-01-611-5761
High Torque Screw
Between 2.433 inches and 2.463 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS7703-34 for national stock number 5305016115761.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-611-5761.
-
MPN or Model
NAS7703-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 2.433 inches and 2.463 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.182 inches and 0.183 inches -
Internal Drive Style
Cross recess type 1 -
End Application
C130 amp cmb -
Thread Diameter
0.190 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4140 -
Surface Treatment
Cadmium head -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-2675 MPN NAS1063E3-551YTerminal Board Marker Strip
- 5305-00-001-4713 MPN NAS1102C04-18Machine Screw
- 5305-00-054-9242 MPN NASM24694-C101Machine Screw
- 5305-00-069-2198 MPN NAS1505-13Close Tolerance Screw
- 5305-00-081-9923 MPN NAS1189-3P8LSocket Head Cap Screw
- 5305-00-082-1760 MPN MS21287-02Machine Screw
- 5305-00-180-3326 MPN NASM525-10R16Machine Screw
- 5305-00-244-2882 MPN NAS623-2-15Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-611-5761 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7703-34 | National Aerospace Standards |