NSN 5305-01-612-7988
High Torque Screw
1.214 inches fastener length, pan head style, between 0.309 inches and 0.311 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1142E15 for national stock number 5305016127988.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-612-7988.
-
MPN or Model
NAS1142E15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.2765 inches -
Fastener Length
1.214 inches -
Head Style
Pan -
Head Diameter
Between 0.309 inches and 0.311 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
0.289 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.1640 inches -
Grip Length
0.9375 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-043-8870 MPN NAS1745-13Conductor Splice
- 5305-00-059-3657 MPN NASM51958-61Machine Screw
- 5305-00-137-3042 MPN MS51861-41CTapping Screw
- 5305-00-143-1329 MPN NAS1402-29Machine Screw
- 5305-00-143-3300 MPN NAS1190-04P3Socket Head Cap Screw
- 5305-00-143-9567 MPN NAS1608-24RShoulder Screw
- 5305-00-145-3882 MPN NAS1402-12Machine Screw
- 5305-00-151-5664 MPN NAS560HK2P11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-612-7988 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1142E15 | National Aerospace Standards |