NSN 5305-01-612-8399
High Torque Screw
1.250 inches fastener length, pan head style, between 0.429 inches and 0.438 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number NAS1125-14 for national stock number 5305016128399.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-612-8399.
-
MPN or Model
NAS1125-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.250 inches -
Head Style
Pan -
Head Diameter
Between 0.429 inches and 0.438 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C5m fuselage -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-348-4727 MPN NAS1063C7-1Terminal Board
- 5305-00-058-4007 MPN MS24694S115Machine Screw
- 5305-00-133-1916 MPN MS27039DD0822Machine Screw
- 5305-00-163-9847 MPN NAS1189ED6P5LKSocket Head Cap Screw
- 5305-00-236-6600 MPN NAS1101-3H4Machine Screw
- 5305-00-252-5070 MPN MS35307-346Hexagon Head Cap Screw
- 5305-00-253-7154 MPN NAS1096-3-31Machine Screw
- 5305-00-269-4513 MPN MS24694S168Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-612-8399 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1125-14 | National Aerospace Standards |