NSN 5305-01-613-7580
High Torque Screw
Between 2.111 inches and 2.141 inches fastener length, flat countersunk head style, between 0.575 inches and 0.635 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number NAS7605A27 for national stock number 5305016137580.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-613-7580.
-
MPN or Model
NAS7605A27
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 2.111 inches and 2.141 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.575 inches and 0.635 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Cross recess type 1 -
End Application
Kc-135 acft -
Thread Diameter
0.312 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-084-4536 MPN 25-22037-77Electrical Equipment Drawer
- 1560-00-097-3556 MPN 9-39876-1Aircraft Structural Component Support
- 1560-00-322-1350 MPN 5-85655-805Nose Cowl Lap Strip
- 1560-00-345-2334 MPN 50-3327Aircraft Structural Component Support
- 5940-00-501-9419 MPN BACT40A1GStud Terminal
- 1560-00-575-9573 MPN 5-95805-8Aircraft Window Panel
- 1560-00-593-5990 MPN 39-3134-1Vapor Fill Valve Seal Assembly
- 1560-00-621-4631 MPN 34-1083-3Aircraft Fairing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-613-7580 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7605A27 | The Boeing Company |