NSN 5305-01-614-1465
High Torque Screw
Between 1.562 inches and 1.592 inches fastener length, flat countersunk head style, between 0.880 inches and 0.890 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number NAS1157E9P for national stock number 5305016141465.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-614-1465.
-
MPN or Model
NAS1157E9P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
Between 1.562 inches and 1.592 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.880 inches and 0.890 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw machine-flat, 100 degree head, close tolerance, short thread, offset cruciform, 160 ksi -
Material
Stainless steel -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1157 professional/industrial association standard
More from these suppliers
- 5935-00-478-1021 MPN NAS1650R12B10SElectrical Receptacle Connector
- 5940-00-549-8877 MPN NAS45-6-14CTerminal Board
- 1680-01-668-8056 MPN NAS355-5-170Aircraft Control Tube Assembly
- 5305-00-001-4755 MPN NAS1020-48AHexagon Head Cap Screw
- 5305-00-007-6200 MPN NAS1102C04-8PMachine Screw
- 5305-00-058-4006 MPN MS24694S114Machine Screw
- 5305-00-121-2420 MPN NAS1352-4LL8PSocket Head Cap Screw
- 5305-00-150-9202 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-614-1465 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1157E9P | National Aerospace Standards |
Stock Check
![](/public/images/partscage_shelf3.png)