NSN 5305-01-616-8620
High Torque Screw
1.113 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS1790V4R11A for national stock number 5305016168620.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-616-8620.
-
MPN or Model
NAS1790V4R11A
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.113 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Titanium alloy uns r56400 -
Material Specification
4928 assn standard single material response and 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas4006 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1790 professional/industrial association standard
More from these suppliers
- 5940-01-664-5697 MPN NAS1063A2-107DLTerminal Board Marker Strip
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-052-9049 MPN MS24630-34Tapping Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-205-3597 MPN MS51958-71BMachine Screw
- 5305-00-206-1828 MPN NAS517-3-25Machine Screw
- 5305-00-206-3706 MPN NAS517-3-22Machine Screw
- 5305-00-225-9444 MPN MS16996-33Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-616-8620 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V4R11A | National Aerospace Standards |