NSN 5305-01-617-7017
High Torque Screw
Between 0.423 inches and 0.463 inches fastener length, flat countersunk head style, between 0.296 inches and 0.331 inches head diameter, grip diameter: 0.163 inches .
Manufacturer part number NAS7502U2 for national stock number 5305016177017.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-617-7017.
-
MPN or Model
NAS7502U2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.423 inches and 0.463 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.331 inches -
Grip Diameter
0.163 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-595-6762 MPN NAS1063D-1-5Terminal Board Marker Strip
- 5935-01-608-5882 MPN 3181-12NAElectrical Connector Cover
- 5305-00-057-0476 MPN MS24694C111Machine Screw
- 5305-00-071-2237 MPN MS90725-14Hexagon Head Cap Screw
- 5305-00-092-6682 MPN MS21125B413Close Tolerance Screw
- 5305-00-125-5701 MPN NAS1352C03-4Socket Head Cap Screw
- 5305-00-182-1370 MPN MILS7839Machine Screw
- 5305-00-211-9039 MPN NAS1206-23DClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-617-7017 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7502U2 | National Aerospace Standards |