NSN 5305-01-620-5385
Panel Screw
0.625 inches fastener length, flat fillister head style, between 0.218 inches and 0.226 inches head diameter, head height: between 0.134 inches and 0.138 inches .
Manufacturer part number 114116-.625-SS-12 for national stock number 5305016205385.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-620-5385.
-
MPN or Model
114116-.625-SS-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Direction
Right-hand -
Thread Length
Between 0.1775 inches and 0.1975 inches -
Fastener Length
0.625 inches -
Head Style
Flat fillister -
Head Diameter
Between 0.218 inches and 0.226 inches -
Head Height
Between 0.134 inches and 0.138 inches -
First Diameter From Head
Between 0.090 inches and 0.100 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.4375 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Captive socket head cap screws -
Material
Steel property class 18.8 -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-f-14072-c, type 1 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5305-01-332-7230 MPN 17015-SS-12Shoulder Screw
- 5305-01-605-3088 MPN P114109-880SSMOD12Hexagon Head Cap Screw
- 5305-01-665-6259 MPN 114058-PP-.250-SS-GF-12Externally Relieved Body Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-620-5385 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
114116-.625-SS-12 | Accurate Screwmachine Corporation |