NSN 5305-01-621-8211
High Torque Screw
0.487 inches fastener length, flat countersunk head style, 0.3047 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1581K3R2G for national stock number 5305016218211.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-621-8211.
-
MPN or Model
NAS1581K3R2G
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
0.487 inches -
Head Style
Flat countersunk -
Head Diameter
0.3047 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
0.363 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
1600 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response and ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas 4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-057-9585 MPN MS35199-7Machine Screw
- 5305-00-071-2229 MPN MS90725-22Hexagon Head Cap Screw
- 5305-00-182-9381 MPN NAS1100C4-22Machine Screw
- 5305-00-186-9546 MPN NAS1351C06H5Socket Head Cap Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-211-9162 MPN NAS1218-3-27Machine Screw
- 5305-00-225-8513 MPN MS90725-49Hexagon Head Cap Screw
- 5305-00-253-5624 MPN MS21318-43Drive Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-621-8211 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K3R2G | National Aerospace Standards |