NSN 5305-01-622-4861
High Torque Screw
Between 0.583 inches and 0.601 inches fastener length, flat countersunk head style, 0.2083 inches head diameter, grip diameter: 0.1625 inches .
Manufacturer part number NAS1992-4T for national stock number 5305016224861.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-622-4861.
-
MPN or Model
NAS1992-4T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.583 inches and 0.601 inches -
Head Style
Flat countersunk -
Head Diameter
0.2083 inches -
Grip Diameter
0.1625 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B-1 -
Thread Diameter
0.164 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, flat, 100 deg. Reduced head, 108 ksi shear -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response and mil-s-5000 military specification 2nd material response and mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type s, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-104-5074 MPN NA1352-4LE44Socket Head Cap Screw
- 5305-00-156-2937 MPN MS35190-249Machine Screw
- 5305-00-182-9577 MPN NAS1081C04A3LSetscrew
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-196-6353 MPN NAS1742C06R6USocket Head Cap Screw
- 5305-00-282-9508 MPN NAS222-19Machine Screw
- 5305-00-338-3227 MPN NAS663V14HTClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-622-4861 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1992-4T | National Aerospace Standards |