NSN 5305-01-622-4998
High Torque Screw
Between 0.580 inches and 0.610 inches fastener length, flat countersunk head style, between 0.266 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30ZE3-4 for national stock number 5305016224998.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-622-4998.
-
MPN or Model
BACB30ZE3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 0.580 inches and 0.610 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.266 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.1900 inches -
Grip Length
0.25 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type 2, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-063-0829 MPN BACS13S415RGrounding Metallic Shielded Cable Ferrule
- 1560-00-073-6893 MPN A02R2884-1Stud Assembly
- 1560-00-335-8310 MPN 90-1417-1Aircraft Access Cover
- 5905-00-401-8792 MPN BACRH14U30900BFFilm Fixed Resistor
- 1560-00-419-8415 MPN 66-25040-4Aircraft Structural Plate
- 5950-00-568-3285 MPN 240-2715-070Radio Frequency Coil
- 1560-00-607-2106 MPN 5-86302-337Door Seal Assembly
- 1560-00-610-1372 MPN 26-1948-4Nacelle Cowling Catch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-622-4998 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30ZE3-4 | The Boeing Company |