NSN 5305-01-622-6699
High Torque Screw
Between 1.172 inches and 1.202 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, head height: 0.133 inches .
Manufacturer part number NAS1155E13 for national stock number 5305016226699.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-622-6699.
-
MPN or Model
NAS1155E13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 1.172 inches and 1.202 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Head Height
0.133 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine-flat 100deg head, close tolerance, short thread, offset cruciform, 160 ksi -
Material
Iron alloy 660 -
Material Specification
Ams5737 national std/spec single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35, type ii or viii federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1151 through 1158 professional/industrial association standard
More from these suppliers
- 5940-00-754-8636 MPN NAS706S3Feedthru Terminal
- 5940-00-833-5836 MPN NAS1063A2-705Terminal Board Marker Strip
- 5940-01-380-7244 MPN NAS1063B45-60Terminal Board Marker Strip
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-008-7855 MPN NAS1100C04-22PMachine Screw
- 5305-00-057-0594 MPN NAS1102C04-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-622-6699 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155E13 | National Aerospace Standards |