NSN 5305-01-623-3917
High Torque Screw
0.650 inches fastener length, flat countersunk head style, between 0.2534 inches and 0.2612 inches head diameter, grip diameter: between 0.1621 inches and 0.1625 inches .
Manufacturer part number NAS1992-5T for national stock number 5305016233917.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-623-3917.
-
MPN or Model
NAS1992-5T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
0.650 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2534 inches and 0.2612 inches -
Grip Diameter
Between 0.1621 inches and 0.1625 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.1640 inches -
Grip Length
0.312 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjc
More from these suppliers
- 5935-01-581-2487 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 1560-01-623-8875 MPN 520-14948-3Aircraft Stringer
- 5940-01-660-0092 MPN NAS1063A2-536GTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-052-2234 MPN MS24667-76Socket Head Cap Screw
- 5305-00-052-6872 MPN MS24627-49Tapping Screw
- 5305-00-052-7434 MPN MS24629-60Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-623-3917 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1992-5T | National Aerospace Standards |