NSN 5305-01-624-0228
High Torque Screw
Between 0.558 inches and 0.588 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS5103U4 for national stock number 5305016240228.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-624-0228.
-
MPN or Model
NAS5103U4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.558 inches and 0.588 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1990 inches and 0.1995 inches -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.1900 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Bolt, pan head, close tolerance, short thread, tri-slot recess, a286 cres, self-locking and nonlocking -
Material
Iron alloy 660 -
Material Specification
A286 cres iaw ams5731, 5732, 5737 or 5853 national std/spec single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Nas4003 national std/spec single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas5100 through 5106 professional/industrial association standard
More from these suppliers
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-008-5905 MPN NAS1189C02T5LSocket Head Cap Screw
- 5305-00-052-6911 MPN MS24629-15Tapping Screw
- 5305-00-057-0539 MPN NASM51958Machine Screw
- 5305-00-060-9820 MPN NAS221C31Machine Screw
- 5305-00-162-3765 MPN NAS1100-06-8BMachine Screw
- 5305-00-174-0584 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-624-0228 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5103U4 | National Aerospace Standards |