NSN 5305-01-627-1661
High Torque Screw
Between 0.663 inches and 0.693 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number NAS7303U5 for national stock number 5305016271661.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-627-1661.
-
MPN or Model
NAS7303U5
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.663 inches and 0.693 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Cross recess type 1 -
End Application
B-1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt close tolerance -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-455-0005 MPN NAS1745-12Conductor Splice
- 5940-00-764-1028 MPN NAS707S4Stud Terminal
- 5935-00-972-8484 MPN NAS715-11BElectrical Receptacle Connector
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-009-5709 MPN NAS1100C06-10PMachine Screw
- 5305-00-052-1560 MPN AN525D8R10Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-627-1661 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7303U5 | National Aerospace Standards |