NSN 5305-01-628-3015
High Torque Screw
Between 1.200 inches and 1.230 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578A4R13 for national stock number 5305016283015.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-628-3015.
-
MPN or Model
NAS1578A4R13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.200 inches and 1.230 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5889 MPN NAS1102C08-9Machine Screw
- 5305-00-050-9216 MPN MS24678-50CSocket Head Cap Screw
- 5305-00-052-4032 MPN NAS1351-7LE16PSocket Head Cap Screw
- 5305-00-070-3274 MPN NAS1102-4-20Machine Screw
- 5305-00-179-9437 MPN MS21125-0411Close Tolerance Screw
- 5305-00-225-9443 MPN MS16996-32Socket Head Cap Screw
- 5305-00-269-3204 MPN MS90725-53Hexagon Head Cap Screw
- 5305-00-269-4222 MPN MS24694S164Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-628-3015 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A4R13 | National Aerospace Standards |