NSN 5305-01-628-6701
Bolt Stove
0.312 inches fastener length, flat countersunk head style, between 0.267 inches and 0.279 inches head diameter, head height: 0.057 inches .
Manufacturer part number NAS514-632-5 for national stock number 5305016286701.
Datasheet
-
Product description
Machine Screw NSN 5305-01-628-6701.
-
MPN or Model
NAS514-632-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
0.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.267 inches and 0.279 inches -
Head Height
0.057 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine, 100 deg, flat head, full threaded, alloy steel -
Screw Material
Steel comp 4130 or steel comp 4340 or steel comp 8740 -
Screw Material Specification
Mil-s-6758 military specification single material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Screw Surface Treatment
Cadmium -
Screw Surface Treatment Specification
Qq-p-416, type i, class 2 federal standard single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5930-00-964-4485 MPN NAS1072-2Switch Guard
- 5305-00-009-7703 MPN NAS1218-06E1Machine Screw
- 5305-00-012-8226 MPN MS51851-136Tapping Screw
- 5305-00-052-9050 MPN MS24630-35Tapping Screw
- 5305-00-054-6682 MPN NAS1635-08-40Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-115-9396 MPN NAS1352-06LL8PSocket Head Cap Screw
- 5305-00-145-0792 MPN NAS1123-11HClose Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-628-6701 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS514-632-5 | National Aerospace Standards |