NSN 5305-01-628-7407
High Torque Screw
Max two incomplete threads. Heat treat to 160-180ksi ftu. Replacement oversized repair bolt. Grip is 0.156 versized. Diameter is 0.2646 min to 0.2651 max..
Manufacturer part number NAS1581F4T9X for national stock number 5305016287407.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-628-7407.
-
MPN or Model
NAS1581F4T9X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
0.9655 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3504 inches and 0.3988 inches -
Grip Diameter
Between 0.2641 inches and 0.2651 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F16 -
Thread Diameter
0.25 inches -
Grip Length
0.5625 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear, 100 degrees flush reduced head, offset cruciform, 95 ksi fsu. -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3015 MPN NAS1063B231-237Terminal Board Marker Strip
- 5940-01-425-7408 MPN NAS1063A11-308Terminal Board Marker Strip
- 5305-00-006-6574 MPN MS90725-600Hexagon Head Cap Screw
- 5305-00-051-3556 MPN NAS1101C04H5Machine Screw
- 5305-00-052-5940 MPN MS35198-82Machine Screw
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
- 5305-00-142-4747 MPN MS16995-112Socket Head Cap Screw
- 5305-00-225-8476 MPN MS24693-S144Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-628-7407 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F4T9X | National Aerospace Standards |