NSN 5305-01-629-1791
High Torque Screw
Minimum tensile strength is 3180 pounds per foot..
Manufacturer part number NAS1580V3R13D for national stock number 5305016291791.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-1791.
-
MPN or Model
NAS1580V3R13D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.333 inches and 0.393 inches -
Fastener Length
Between 1.160 inches and 1.190 inches -
Head Style
Flat countersunk -
Head Diameter
0.339 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches and 0.080 inches all holes -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.1900 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, shear -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-007-9882 MPN NAS1100E04-18PMachine Screw
- 5305-00-027-5752 MPN MS21262-28Socket Head Cap Screw
- 5305-00-052-6885 MPN MS35198-45Machine Screw
- 5305-00-067-9917 MPN NAS609C3H10Socket Head Cap Screw
- 5305-00-144-0348 MPN NAS1218-06-6PMachine Screw
- 5305-00-151-0147 MPN NAS207-30Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-1791 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3R13D | National Aerospace Standards |