NSN 5305-01-629-2193
High Torque Screw
Drilled threads.
Manufacturer part number NAS1580V3R26D for national stock number 5305016292193.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-2193.
-
MPN or Model
NAS1580V3R26D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.973 inches and 2.003 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1-bacft -
Thread Diameter
0.190 inches -
Grip Length
1.625 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-160-2471 MPN NAS1666-16Electrical Connector Cable Clamp
- 1680-00-604-8346 MPN NAS26-3Tank Strap Trunnion
- 5940-01-425-7395 MPN NAS1063A11-324Terminal Board Marker Strip
- 5940-01-207-0227 MPN NAS1745-20Conductor Splice
- 5305-00-008-5879 MPN NAS1191E04P4LHSocket Head Cap Screw
- 5305-00-010-5137 MPN MS24694S109Machine Screw
- 5305-00-052-8236 MPN MS51861-52Tapping Screw
- 5305-00-057-0527 MPN NASM51958Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-2193 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3R26D | National Aerospace Standards |