NSN 5305-01-629-6678
High Torque Screw
Between 1.048 inches and 1.078 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1790V3-10 for national stock number 5305016296678.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-6678.
-
MPN or Model
NAS1790V3-10
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 1.048 inches and 1.078 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
End Application
Aircraft a400m -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-400-4774 MPN NAS1668-3Electrical Connector End Seal Plug
- 1680-00-939-9126 MPN 25-4LTrunnion Tank Strap
- 5940-01-357-3664 MPN NAS1063A14-12Terminal Board Marker Strip
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-051-2355 MPN NAS514P832-28Machine Screw
- 5305-00-089-7664 MPN MS51021-73Setscrew
- 5305-00-130-7656 MPN MS27039DD4-24Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-6678 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V3-10 | National Aerospace Standards |