NSN 5305-01-629-6690
High Torque Screw
0.506 inches head diameter, 0.111 inches head height, 0.081 inches hole diameter, grip diameter: 0.2490 inches .
Manufacturer part number NAS1790V4R14A for national stock number 5305016296690.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-6690.
-
MPN or Model
NAS1790V4R14A
-
Thread Class
3a -
Thread Length
0.425 inches -
Head Diameter
0.506 inches -
Head Height
0.111 inches -
Hole Diameter
0.081 inches -
Grip Diameter
0.2490 inches -
Point Length
0.050 inches -
Point Style
Flat -
Internal Drive Style
High-torque -
End Application
AIRB-US-A40-0MAT -
Thread Diameter
0.2500 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 degree flush head, 160 ksi uts -
Surface Treatment
Aluminum -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-671-5938 MPN NAS622CEBHook
- 5940-00-833-5836 MPN NAS1063A2-804Terminal Board Marker Strip
- 5940-01-451-2667 MPN NAS1063A10-105BRTerminal Board Marker Strip
- 5940-01-451-2685 MPN NAS1063E3-551WTerminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5305-00-001-6359 MPN NAS1352-06LB4PSocket Head Cap Screw
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-051-4095 MPN MS24677-84Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-6690 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V4R14A | National Aerospace Standards |