NSN 5305-01-629-6696
High Torque Screw
Oval head style, 0.339 inches head diameter, 0.1895 inches bottom countersink diameter, head height: 0.083 inches .
Manufacturer part number NAS1790V3R11AD for national stock number 5305016296696.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-6696.
-
MPN or Model
NAS1790V3R11AD
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Length
0.338 inches -
Head Style
Oval -
Head Diameter
0.339 inches -
Bottom Countersink Diameter
0.1895 inches -
Head Height
0.083 inches -
Hole Diameter
0.075 inches -
Grip Diameter
0.1895 inches -
End Application
Aircraft a400m -
Thread Diameter
0.1900 inches -
Hole Quantity
1 -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 degree flush head 160 ksi uts -
Material
Titanium -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-423-4601 MPN NAS6704D25Aircraft Structural Component Support
- 5940-01-612-7438 MPN NAS1063B2-4Terminal Board Marker Strip
- 5305-00-019-9914 MPN NAS334CP40Close Tolerance Screw
- 5305-00-051-6981 MPN MS27039DD4-28Machine Screw
- 5305-00-052-7532 MPN MS24617-59Tapping Screw
- 5305-00-053-8967 MPN NAS1352C08-4Socket Head Cap Screw
- 5305-00-150-3420 MPN NAS1635-06LE16Socket Head Cap Screw
- 5305-00-173-8055 MPN NAS1146-4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-6696 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V3R11AD | National Aerospace Standards |