NSN 5305-01-629-6698
High Torque Screw
Heat treat 160-180 ksi ftu per ams 4928 or ams 4967.
Manufacturer part number NAS1790V3R13A for national stock number 5305016296698.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-6698.
-
MPN or Model
NAS1790V3R13A
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 1.693 inches and 1.728 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, 100 degrees flush head 160, 000 psi uts -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas 4006 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 1560-01-423-0215 MPN NAS6706D19Aircraft Structural Component Support
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-059-3086 MPN MS24694-S103Machine Screw
- 5305-00-139-3223 MPN NAS1402-9Machine Screw
- 5305-00-147-3230 MPN MS51861-2CTapping Screw
- 5305-00-179-9439 MPN MS21125-0308Close Tolerance Screw
- 5305-00-225-9450 MPN MS16995-70Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-6698 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V3R13A | National Aerospace Standards |