NSN 5305-01-629-7668
High Torque Screw
Between 0.910 inches and 0.940 inches fastener length, flat countersunk head style, 0.3813 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1580V3R9D for national stock number 5305016297668.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-7668.
-
MPN or Model
NAS1580V3R9D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Flat countersunk -
Head Diameter
0.3813 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1-bacft -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-323-4641 MPN MS33687-24-28PElectrical Connector Insert
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-008-9049 MPN NAS1743C4T16USocket Head Cap Screw
- 5305-00-058-4022 MPN MS24694S124Machine Screw
- 5305-00-079-7965 MPN MS24694S214Machine Screw
- 5305-00-170-1606 MPN NAS664V5HTClose Tolerance Screw
- 5305-00-182-9451 MPN MS21090-0626Socket Head Cap Screw
- 5305-00-213-8844 MPN NAS1191-4P5Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-7668 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3R9D | National Aerospace Standards |