NSN 5305-01-629-8037
High Torque Screw
Internal drive ribbed, item has drilled threads.
Manufacturer part number NAS1580V3R11D for national stock number 5305016298037.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-8037.
-
MPN or Model
NAS1580V3R11D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.036 inches and 1.066 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-430-4123 MPN NAS1063A10-502ASTerminal Board Marker Strip
- 5305-00-079-7977 MPN MS24694S195Machine Screw
- 5305-00-104-5075 MPN NAS1352-5LE52PSocket Head Cap Screw
- 5305-00-405-2534 MPN NAS1081C5A4Setscrew
- 5305-00-406-7781 MPN MS35308-378Hexagon Head Cap Screw
- 5305-00-467-0115 MPN NAS1351-6LB12PSocket Head Cap Screw
- 5305-00-517-6339 MPN NAS388-8-6PMachine Screw
- 5305-00-527-4424 MPN NAS584-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-8037 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580V3R11D | National Aerospace Standards |