NSN 5305-01-629-8424
High Torque Screw
Between 1.065 inches and 1.095 inches fastener length, flat countersunk head style, between 0.951 inches and 1.014 inches head diameter, grip diameter: between 0.498 inches and 0.499 inches .
Manufacturer part number NAS1580C8T5 for national stock number 5305016298424.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-8424.
-
MPN or Model
NAS1580C8T5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.768 inches -
Fastener Length
Between 1.065 inches and 1.095 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.014 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-391-1828 MPN NAS1063B46-50Terminal Board Marker Strip
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5935-01-608-5882 MPN 3181-12NAElectrical Connector Cover
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-051-7326 MPN NAS1352-3H10Socket Head Cap Screw
- 5305-00-052-6907 MPN MS24629-2Tapping Screw
- 5305-00-071-1780 MPN MS90725-127Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-8424 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C8T5 | National Aerospace Standards |