NSN 5305-01-629-9851
High Torque Screw
Between 1.949 inches and 1.969 inches fastener length, flat countersunk undercut head style, between 0.5149 inches and 0.5662 inches head diameter, head height: 0.081 inches .
Manufacturer part number NAS1581K6T24 for national stock number 5305016299851.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-629-9851.
-
MPN or Model
NAS1581K6T24
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.949 inches and 1.969 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.5149 inches and 0.5662 inches -
Head Height
0.081 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
6160 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-7408 MPN NAS1063A11-308Terminal Board Marker Strip
- 5940-01-451-2576 MPN NAS1063D1-1Terminal Board Marker Strip
- 5940-01-381-7134 MPN NAS1063B246-255Terminal Board Marker Strip
- 5305-00-007-1559 MPN NAS1100C04-16PMachine Screw
- 5305-00-016-6330 MPN MS24627-46Tapping Screw
- 5305-00-059-8263 MPN MS35214-38Machine Screw
- 5305-00-067-9847 MPN MS24693-S119Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-629-9851 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K6T24 | National Aerospace Standards |
NAS1581K6T24 | National Aerospace Standards |
Stock Check
- NE: 1657