NSN 5305-01-632-1630
High Torque Screw
3.403 inches fastener length, flat countersunk head style, 1.016 inches head diameter, grip diameter: between 0.5141 inches and 0.5151 inches .
Manufacturer part number NAS7608A46X for national stock number 5305016321630.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-632-1630.
-
MPN or Model
NAS7608A46X
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
3.403 inches -
Head Style
Flat countersunk -
Head Diameter
1.016 inches -
Grip Diameter
Between 0.5141 inches and 0.5151 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
End Application
Kc-135 acft -
Thread Diameter
0.500 inches -
Grip Length
2.875 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 national specification single material response or ams 4967 national specification single material response -
Surface Treatment
Aluminum -
Thread Series Designator
Unf
More from these suppliers
- 5930-00-850-3806 MPN NAS543-5Toggle Switch
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-003-6769 MPN MS24627-64Tapping Screw
- 5305-00-008-9112 MPN NAS1190E02T3LSocket Head Cap Screw
- 5305-00-057-0533 MPN NASM51958Machine Screw
- 5305-00-108-9944 MPN NAS1352C03-5Socket Head Cap Screw
- 5305-00-151-2026 MPN MILS7839Machine Screw
- 5305-00-167-3629 MPN AN525-416-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-632-1630 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7608A46X | National Aerospace Standards |