NSN 5305-01-633-0062
High Torque Screw
0.937 inches fastener length, flat top elevator head style, 0.577 inches head diameter, head height: 0.122 inches .
Manufacturer part number NAS1155E9 for national stock number 5305016330062.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-633-0062.
-
MPN or Model
NAS1155E9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
0.937 inches -
Head Style
Flat top elevator -
Head Diameter
0.577 inches -
Head Height
0.122 inches -
Grip Diameter
0.315 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.577 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine-flat 100 degree head, close tolerance, short thread, offset cruciform, 160 ksi -
Material
Stainless steel fastener -
Material Specification
Cres, 160 ksi, a286 mfr ref single material response fastener -
Surface Treatment
Cadmium fastener -
Surface Treatment Specification
Qq-p-416, ty ii cl 2 federal specification single treatment response fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-410-3995 MPN NAS1666-10Electrical Connector Backshell
- 5305-00-004-5186 MPN NAS1102-4-40Machine Screw
- 5305-00-005-8111 MPN MS24671-88Socket Head Cap Screw
- 5305-00-027-5666 MPN NAS608-256-4Socket Head Cap Screw
- 5305-00-057-0495 MPN MS24694S11Machine Screw
- 5305-00-070-3118 MPN NAS1633E6Machine Screw
- 5305-00-082-1724 MPN MS27039-0820Machine Screw
- 5305-00-140-4899 MPN NAS1352-6LN24PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-633-0062 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1155E9 | National Aerospace Standards |