NSN 5305-01-642-5150
Tap Bolt
Between 0.4840 inches and 0.5310 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS1802-4-08 for national stock number 5305016425150.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-642-5150.
-
MPN or Model
NAS1802-4-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.423 inches -
Fastener Length
Between 0.4840 inches and 0.5310 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Screw Material
Iron alloy 660 -
Screw Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Bearing Surface Of Head Surface Finish
63.0 microinches -
Thread Surface Finish
32.0 microinches -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-057-6009 MPN NAS1196-8Receptacle Dummy Connector
- 5940-00-727-3107 MPN NAS704C2Stud Terminal
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-052-6875 MPN MS24627-51Tapping Screw
- 5305-00-058-5145 MPN NAS514P440+12BMachine Screw
- 5305-00-068-0519 MPN MS35190-312Machine Screw
- 5305-00-135-5056 MPN MS24671-21Socket Head Cap Screw
- 5305-00-144-8295 MPN MS24693-1BMachine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-642-5150 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1802-4-08 | National Aerospace Standards |