NSN 5305-01-642-8658
High Torque Screw
Offset cruciform recess iaw nasm33781 or nasm14191;head marked with basic part number,applicable dash number,mfg trade mark and matl code where applicable;heat treat 160-190 ksi ftu.
Manufacturer part number NAS1132E9 for national stock number 5305016428658.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-642-8658.
-
MPN or Model
NAS1132E9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.823 inches and 0.853 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.1640 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2240 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Screw, machine, pan head, close tolerance, short thread, offset cruciform -
Material
Stainless steel -
Material Specification
A286 iaw ams5731, 5732, 5737 or 5853 national standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams2700, method 1, class 4 national standard single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1131 through nas1138 professional/industrial association standard
More from these suppliers
- 5940-01-451-2674 MPN NAS1063E3-551VTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-016-8193 MPN MS27039-1-42Machine Screw
- 5305-00-045-4832 MPN NAS1352-08H4PSocket Head Cap Screw
- 5305-00-052-9052 MPN MS24630-37Tapping Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-088-9666 MPN MS24693-C51Machine Screw
- 5305-00-121-7972 MPN MS21295-63Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-642-8658 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1132E9 | National Aerospace Standards |
Stock Check
- NE: 987