NSN 5305-01-642-8659
High Torque Screw
Offset cruciform recess iaw nasm33781 or nasm14191;head marked with basic part number,applicable dash number,mfg trade mark and matl code where applicable;heat treat 160-190 ksi ftu.
Manufacturer part number NAS1134E22 for national stock number 5305016428659.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-642-8659.
-
MPN or Model
NAS1134E22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.676 inches and 1.706 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.2500 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
5820 pounds per square inch -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Screw, machine, pan head, close tolerance, short thread, offset cruciform -
Material
Stainless steel -
Material Specification
A286 iaw ams5731, 5732, 5737 or 5853 national standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams2700, method 1, class 4 national standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1131 through nas1138 professional/industrial association standard
More from these suppliers
- 5935-00-989-0884 MPN NAS1196-9Receptacle Dummy Connector
- 5940-01-439-4146 MPN NAS1063A16-507ETerminal Board Marker Strip
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-052-7478 MPN MS24628-12Tapping Screw
- 5305-00-052-9329 MPN MS16996-21Socket Head Cap Screw
- 5305-00-116-1463 MPN NAS1205-18DClose Tolerance Screw
- 5305-00-144-0368 MPN NAS1189-4P14Machine Screw
- 5305-00-147-3232 MPN MS51861-26CTapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-642-8659 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1134E22 | National Aerospace Standards |