NSN 5305-01-643-0535
High Torque Screw
Between 2.708 inches and 2.728 inches fastener length, crowned hexagon head style, between 0.251 inches and 0.266 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NASM3369B8-33 for national stock number 5305016430535.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-643-0535.
-
MPN or Model
NASM3369B8-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.416 inches -
Fastener Length
Between 2.708 inches and 2.728 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.251 inches and 0.266 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Internal Drive Style
Slot -
Thread Diameter
0.500 inches -
Grip Length
Between 2.062 inches and 2.078 inches -
Thready Qty Per Inch (tpi)
20 -
Part Name Assigned By Controlling Agency
Bolt, self-retaining, hexagon slotted head -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-005-8857 MPN MS24266R12T3SNElectrical Plug Connector
- 5930-00-050-2708 MPN MS35059-16Toggle Switch
- 5935-00-201-7261 MPN MS27473T8B98SElectrical Plug Connector
- 5935-00-215-5972 MPN MS3102A18-13SElectrical Receptacle Connector
- 5935-00-233-6783 MPN MS27508E16B26SElectrical Receptacle Connector
- 5935-00-250-5724 MPN MS27497T22B2PAElectrical Receptacle Connector
- 5905-00-279-2633 MPN MS35045-61Composition Fixed Resistor
- 5905-00-279-4320 MPN MS35045-1Composition Fixed Resistor
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-643-0535 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM3369B8-33 | Military Standards |
MS3369B8-33 | Military Standards |