NSN 5305-01-645-1028
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1580C9T11 for national stock number 5305016451028.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-645-1028.
-
MPN or Model
NAS1580C9T11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.881 inches -
Fastener Length
Between 1.554 inches and 1.584 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.071 inches and 1.140 inches -
Grip Diameter
Between 0.560 inches and 0.561 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B52 -
Thread Diameter
0.562 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-027-5921 MPN NAS1389-1Conductor Splice
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 1680-01-479-7276 MPN NAS354-5-1488Rod
- 5305-00-032-3955 MPN NAS1153-38Close Tolerance Screw
- 5305-00-052-7477 MPN MS24627-69Tapping Screw
- 5305-00-057-0535 MPN MS51958-51Machine Screw
- 5305-00-058-9374 MPN MS51977-41Setscrew
- 5305-00-149-9942 MPN NAS334A6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-645-1028 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C9T11 | National Aerospace Standards |
Stock Check
- NE: 117