NSN 5305-01-645-4783
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, flat countersunk head style, 0.381 inches head diameter, spline major diameter: 0.155 inches .
Manufacturer part number NAS5315V3A5 for national stock number 5305016454783.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-645-4783.
-
MPN or Model
NAS5315V3A5
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Flat countersunk -
Head Diameter
0.381 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, shear, close tolerance -
Material
Titanium -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-341-7798 MPN NAS1063A20-4SCTerminal Board Marker Strip
- 5940-01-380-6763 MPN NAS1063B81-100Terminal Board Marker Strip
- 5940-01-425-7558 MPN NAS1063A3-TB504AHTerminal Board Marker Strip
- 5940-01-451-2680 MPN NAS1063E3-551TTerminal Board Marker Strip
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5305-00-050-9223 MPN MS24667-45Socket Head Cap Screw
- 5305-00-099-7877 MPN NAS1351-5H16PSocket Head Cap Screw
- 5305-00-133-4548 MPN NAS1352C06-28Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-645-4783 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5315V3A5 | National Aerospace Standards |
NAS5315V3A5 | National Aerospace Standards |
NAS5315V3A5 | National Aerospace Standards |
NAS5315V3A5 | National Aerospace Standards |
NAS5315V3A5 | National Aerospace Standards |
NAS5315V3A5 | National Aerospace Standards |