NSN 5305-01-645-4799
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, spline major diameter: 0.155 inches .
Manufacturer part number NAS5315V3A7 for national stock number 5305016454799.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-645-4799.
-
MPN or Model
NAS5315V3A7
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, shear, close tolerance -
Material
Titanium -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-935-8317 MPN NAS1746-4Conductor Splice
- 5305-00-052-7004 MPN MS21295-36Socket Head Cap Screw
- 5305-00-058-9367 MPN MS51977-29Setscrew
- 5305-00-103-2993 MPN NAS602-32PMachine Screw
- 5305-00-119-7529 MPN NAS1191-06P6Socket Head Cap Screw
- 5305-00-135-5056 MPN MS24671-21Socket Head Cap Screw
- 5305-00-141-6523 MPN MS24693B50Machine Screw
- 5305-00-145-8354 MPN NAS1081-04D6LSetscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-645-4799 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5315V3A7 | National Aerospace Standards |
NAS5315V3A7 | National Aerospace Standards |
NAS5315V3A7 | National Aerospace Standards |
NAS5315V3A7 | National Aerospace Standards |
NAS5315V3A7 | National Aerospace Standards |
NAS5315V3A7 | National Aerospace Standards |