NSN 5305-01-646-2177
Close Tolerance Screw
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-646-2177.
-
MPN or Model
JSFB33E5-7G
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel
More from these suppliers
- 1560-00-105-1732 MPN 12C223-2Rudder Idler Assembly
- 1560-00-105-7286 MPN 12M649-13Drive Shaft Bearing Support
- 4820-00-133-9292 MPN C875-8C8D122Restrictor Check Valve
- 1560-00-239-9835 MPN 12H1424-801Air Structural Component Support
- 1560-00-244-6457 MPN 12M4972-7Lower Fuselage Controls Clamp
- 1560-00-482-3235 MPN 12S1114-103Trailing Pylon Panel
- 1560-00-574-0428 MPN C3175-40BTubing Support
- 1680-00-906-9392 MPN 540N011-11Bell Crank
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Pricing and Availability
Get a quote for 5305-01-646-2177 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
JSFB33E5-7G | Lockheed Martin Corporation |
JSFB33E5-7G | Click Bond, Inc. |
Stock Check
