NSN 5305-01-649-9709
High Torque Screw
1.219 inches fastener length, countersunk cylindrical convex head style, 0.249 inches grip diameter, single shear strength: 4650 pounds per square inch.
Manufacturer part number NAS334CA11-5 for national stock number 5305016499709.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-649-9709.
-
MPN or Model
NAS334CA11-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.219 inches -
Head Style
Countersunk cylindrical convex -
Grip Diameter
0.249 inches -
Single Shear Strength
4650 pounds per square inch -
Head Major Diameter
Between 0.497 inches and 0.507 inches -
Internal Drive Style
Hexagon -
End Application
1055-01-536-7106 -
Thread Diameter
0.250 inches -
Grip Length
0.750 inches -
Width Across Flats
Between 0.157 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
5000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-051-7325 MPN NAS1352-3H32Socket Head Cap Screw
- 5305-00-052-7495 MPN MS16995-87Socket Head Cap Screw
- 5305-00-057-0484 MPN MS24694C128Machine Screw
- 5305-00-057-0534 MPN NASM51958Machine Screw
- 5305-00-133-3598 MPN MS24694A109Machine Screw
- 5305-00-151-6229 MPN NAS662C2-7Machine Screw
- 5305-00-174-0686 MPN NAS205-21Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-649-9709 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334CA11-5 | National Aerospace Standards |