NSN 5305-01-651-9666
High Torque Screw
Between 1.453 inches and 1.499 inches fastener length, countersunk cylindrical convex head style, between 0.1885 inches and 0.1894 inches grip diameter, head major diameter: between 0.376 inches and 0.385 inches .
Manufacturer part number NAS333CA13-5 for national stock number 5305016519666.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-651-9666.
-
MPN or Model
NAS333CA13-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 1.453 inches and 1.499 inches -
Head Style
Countersunk cylindrical convex -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Head Major Diameter
Between 0.376 inches and 0.385 inches -
Internal Drive Style
Hexagon -
End Application
1055-01-536-7106 -
Thread Diameter
0.1900 inches -
Grip Length
1.062 inches -
Width Across Flats
Between 0.1260 inches and 0.1290 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6382 assn standard single material response or ams6349 assn standard single material response or ams6484 assn standard single material response or ams6414 assn standard single material response or ams6322 assn standard single material response or ams6327 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type ii, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-01-650-5867 MPN 109110525-6Directional Control Linear Valve
- 5940-01-051-1222 MPN NAS1745-17Conductor Splice
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-008-5845 MPN NAS1632CE7Machine Screw
- 5305-00-053-8077 MPN MS24677-104Socket Head Cap Screw
- 5305-00-058-9373 MPN MS51977-40Setscrew
- 5305-00-080-7385 MPN NAS1190C08P7LSocket Head Cap Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-651-9666 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333CA13-5 | Lockheed Martin Corporation |
NAS333CA13-5 | National Aerospace Standards |