NSN 5305-01-651-9698
High Torque Screw
Between 1.704 inches and 1.750 inches fastener length, countersunk cylindrical convex head style, between 0.3108 inches and 0.3117 inches grip diameter, head major diameter: between 0.625 inches and 0.635 inches .
Manufacturer part number NAS335CA15 for national stock number 5305016519698.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-651-9698.
-
MPN or Model
NAS335CA15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.704 inches and 1.750 inches -
Head Style
Countersunk cylindrical convex -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Head Major Diameter
Between 0.625 inches and 0.635 inches -
Internal Drive Style
Hexagon -
End Application
1055-01-536-7106 -
Thread Diameter
0.3125 inches -
Grip Length
1.188 inches -
Width Across Flats
Between 0.1885 inches and 0.1905 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Ams6382 assn standard single material response or ams6349 assn standard single material response or ams6484 assn standard single material response or ams6414 assn standard single material response or ams6322 assn standard single material response or ams6327 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams-qq-p-416, type ii, class 2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-454-3308 MPN NAS1653R12B10PNElectrical Plug Connector
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-007-6198 MPN NAS1631C26PMachine Screw
- 5305-00-008-9113 MPN NAS1190E02T4LSocket Head Cap Screw
- 5305-00-044-5504 MPN MS90725-158Hexagon Head Cap Screw
- 5305-00-066-7369 MPN MS24693-C12Machine Screw
- 5305-00-078-0187 MPN NAS623-2-17Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-651-9698 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335CA15 | Lockheed Martin Corporation |
NAS335CA15 | National Aerospace Standards |