NSN 5305-01-652-4320
High Torque Screw
Head, close tolerance, short, thread, offset cruciform, 160 ksi.
Manufacturer part number NAS1151E20 for national stock number 5305016524320.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-652-4320.
-
MPN or Model
NAS1151E20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.511 inches and 1.541 inches -
Head Style
Flat countersunk -
Grip Diameter
Between 1.365 inches and 1.375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.1380 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine-flat -
Material
Stainless steel -
Material Specification
Ams 5737 international std/spec single material response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5940-01-666-7087 MPN NAS1063C6-619ATerminal Board Marker Strip
- 5305-00-005-8111 MPN MS24671-88Socket Head Cap Screw
- 5305-00-007-2952 MPN NAS1100E02-2Machine Screw
- 5305-00-007-6172 MPN NAS1100E00-4Machine Screw
- 5305-00-068-9167 MPN MS35202-73Machine Screw
- 5305-00-140-8028 MPN MS18064-62Setscrew
- 5305-00-142-5083 MPN NAS1628-15Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-652-4320 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1151E20 | National Aerospace Standards |